Permeable and non-permeable Low-Density Cellular Concrete (LDCC) differ primarily in their ability to allow water to pass through, which is determined by the mix design and intended application. Here’s a breakdown of the two:
Permeable LDCC
- Definition: Permeable LDCC is engineered with a higher void content, allowing water to flow through it. The foam and aggregate structure creates interconnected air pockets or pathways.
- Properties:
- Permeability: High, typically designed to drain water at rates similar to coarse gravel (e.g., 100-300 inches per hour, depending on the mix).
- Density: Still lightweight (20-90 pounds per cubic foot), but slightly denser than ultra-low-density non-permeable mixes due to adjustments in foam and cement content.
- Strength: Lower compressive strength (e.g., 50-200 psi) compared to non-permeable LDCC, as the open structure sacrifices some load-bearing capacity for drainage.
- Advantages:
- Excellent for managing stormwater or groundwater around foundations, retaining walls, or pavements.
- Reduces hydrostatic pressure by allowing water to dissipate quickly.
- Can act as a drainage layer, eliminating the need for separate gravel or pipe systems in some cases.
- Applications:
- Backfill in areas with high water tables or heavy rainfall.
- Subbase for permeable pavements or green infrastructure projects.
- Situations where drainage is a priority over maximum strength.
- Trade-offs: Reduced strength and insulation properties compared to non-permeable LDCC; may not be ideal where water infiltration needs to be minimized.
Non-Permeable LDCC
- Definition: Non-permeable LDCC is designed with a denser, closed-cell structure that prevents water from passing through. The foam cells are encapsulated, and the mix often includes less void space.
- Properties:
- Permeability: Very low (essentially waterproof once cured), with water absorption rates often below 10% by volume.
- Density: Still lightweight (20-90 pounds per cubic foot), adjustable based on strength needs.
- Strength: Higher compressive strength (e.g., 100-500 psi or more), as the closed-cell structure enhances load-bearing capacity.
- Advantages:
- Prevents water infiltration, reducing lateral pressure from water on foundation walls or structures.
- Offers better insulation due to trapped air cells (thermal conductivity typically 0.1-0.3 W/m·K).
- Provides a stable, uniform fill with no risk of water weakening the material over time.
- Applications:
- Backfill for foundations or retaining walls in wet environments where water resistance is critical.
- Void filling under slabs or in confined spaces where settlement and water exposure must be avoided.
- Projects requiring lightweight fill with moderate strength and insulation.
- Trade-offs: Lacks drainage capability, so additional drainage systems (e.g., weep holes, gravel layers) may be needed in high-water areas.
Key Differences
Feature | Permeable LDCC | Non-Permeable LDCC |
---|---|---|
Water Flow | Allows water through | Blocks water |
Strength | Lower (50-200 psi) | Higher (100-500+ psi) |
Density | Slightly higher voids | Adjustable, often denser |
Drainage | Excellent | None |
Insulation | Moderate | Better |
Best Use | Drainage-focused | Stability-focused |
Choosing Between Them
- Permeable LDCC is ideal when managing water flow is a priority, such as in flood-prone areas or where foundations need to “breathe” and drain efficiently.
- Non-Permeable LDCC shines in scenarios where water resistance, higher strength, or insulation is more critical, like below-grade walls or in areas with poor natural drainage requiring separate water management.
Volume Concrete LLC tailors the LDCC mix to project specs, so the choice depends on site conditions (e.g., soil type, groundwater), structural demands, and whether drainage or water resistance takes precedence.