Volume Concrete LLC., is supplying a fast setting, High Early Strength Concrete (HESC) produced by Rapid Set®

Concrete Cure Time Estimator for Rapid Set Concrete from Volume Concrete

This chart illustrates the compressive strength development over time for Rapid Set Concrete, based on the following key milestones:

• 3,000 psi after 4 hours
• 5,000 psi after 24 hours

How We Attain These Calculations

These compressive strength values are obtained through laboratory testing in accordance with ASTM C39 standards, where concrete samples are prepared, cured under controlled conditions, and subjected to compression tests at specified time intervals to measure their load-bearing capacity.

• POTHOLES
• Man Hole Replacements
• Sidewalks
• Roadways – Pavement
• Trench work repairs
• Industrial Floors
• Utility Cuts
• Pipe Bedding
• Runway and Pavement Subbase

*FAQ’s and READ THIS PAGE regarding Rapid Set® Concrete Deliveries